Step #1 Cardboard Cut 24 squares of 6cm x 6cm. Cut 5cm x 5cm for the different sets of cardboard. You can use regular cardboard, but fine cardboard would be better.
Step #2 Cut Place a 5cm x 5cm cardboard on the 6cm x 6cm and trace out the 5cmcardboardand put glue on it.
Step #3 Glue Place the cardboard on top of the cardboard underneath, next to the corner you placed the glue. You will do this again so you should end up with 3 pieces of cardboard stacking one on the other. Do this so you have 8 stacks of cardboard.
Step #4 Tape If you have tape, you are more than welcome to tape the outer piece that was tapped (It helps makes the puzzle slide more efficiently)
Step #5 Cardboard part 2 Grab a big piece of cardboard and paint(you can use Construction paper). 12 strips of Cardboard 3.5 cm x 25. On the cardboard place your first cardboard strip on the edge of the cardboard (do not glue it yet). The second strip place it on the other side of the cardboard and glue it. For the third strip make sure the strips fit the disks underneath the same for fourth and glue. Glue strip 1 now. Repeat for 2 more layers.
Step #6 Paint part 2 and picture If you would like you can paint the other base of any color you like or use colored tape or paper. Place a picture of your choice that fits the size of the disk. In this, it would be 18 cm x 18 cm or 15 cm x 15 cm or 12 cm x 12 cm. Cut off a square cm so your “disks are able to move”. Evenly cut out the picture into 8 6cm x 6cm disks then place glue of the disk and apply the piece of the picture on top.
Step #7 Have Fun This is the end of the Step-by-Step tutorial hope you make this one day for your loved ones!
